...
| Sub-Step # | Instruction | Screenshot |
|---|---|---|
| 1.1 | In the search bar, type in RDP. |
|
| 1.2 | This should bring up Remote Desktop Connection. Click on Remote Desktop Connection to open it. |
|
| 1.3 | Click Show Options so we can make the necessary setting changes. |
|
| 1.4 | In the Computer field, enter the end users' your server name. In this example, it is CR1001-TS-01, but the customer's server will vary. If you don't know what the customer's server is called, reach out to the Tier 2 teamIf you do not know your server name, reach out to your admin if they know it, or contact us to confirm it. In the User Name field, enter the your UPN (usually matches the user's your email address). The UPN can be found in oCCP is the user is unsure of what it is.
|
|
| 1.5 | Next, click the Display tab. If the user has you have multiple monitors, and wants want to use them all, select Use all my monitors for the remote session.Depending on if the user needs to switch between the local and the remote desktop, they can also deselect Display the connection bar when I use full screen. The connection bar makes it easy to switch from local to remote desktops, but can get in the way if this is not necessary. |  |
| 1.6 | Next, click to Local Resources tab. This is where options for sound or connected devices are found. Printers and Clipboard are selected by default, but make sure they are selected. You can click the More button to see other options. From in the More menu, you can select local drives, connected devices, etcetera, to pass through RDP. We will not be covering this in the guide, as it will be user specific.
|
|
| 1.7 | Next, click on the Advanced tab. From the Advanced tab, click Settings. |
|
| 1.8 | Select Use these RD Gateway server settings: and then enter rdsh.nirix.com as the server name. Deselect Bypass RD Gateway server for local addresses Select Use my RD Gateway credentials for the remote computer |
|
| 1.9 | Click back to the General tab. Click Save As... |
|
| 1.10 | Name the RDP shortcut as required. I have named it NIRIX Desktop in this guide. I have also placed it on the Desktop of the User, for convenient access. Once you are done, click Save. |
|
| 1.11 | You can now close Remote Desktop Connection. |
|
| 1.12 | The shortcut that was created can now be double clicked. All the settings should be saved in it. |
|
| 1.13 | The first time the connection is opened, there will be a notification as shown here. Click Don't ask me again for connections to this computer. Then click Connect. |
|
| 1.14 | The users Your password will then be requested. I would suggest NOT clicking the Remember me button. Enter their password and then click OK. |
|
| 1.15 | The first time the connection is made, the following will also be displayed. Click the Don't ask me again for connections to this computer and then click Yes. |
|
| 1.16 | The connection will then start! |
|
...